 |
|
|
South
Bend designs and manufactures performance clutches that are smooth and reliable.
Complete kits are available for for both 5 and 6 speed transmissions, and for
a variety of horsepower applications. PDR stocks and installs clutches for 1989-2006
Dodge RAM diesels.
South Bend also designs and manufactures a complete line of high performance dual disc clutches. For applications over 550HP or for Sled Pulling and Drag Racing check out the South Bend Dual Disc Clutches.
|
|
Model
|
Application
|
MU 0090 Rally
|
'89-05, all 5sp & 6sp non ETH, up to 350hp, 700 ft-lbs torque
|
|
MU 0090 Con O
|
'89-05, all 5sp & 6sp non ETH, up to 400hp, 900 ft-lbs torque
|
| |
|
| MU 13-1.25 Con O |
'89-05, all 5sp & 6sp non ETH, 12-1/4" to 13" clutch conversion, up to 350hp, 750 ft-lbs torque, includes flywheel
|
|
MU 13-1.25 Con OFE
|
'89-05, all 5sp & 6sp non ETH, 12-1/4" to 13" clutch conversion, up to 450hp, 1000 ft-lbs torque, includes flywheel
|
| MU 13-1.25 Con FE |
'89-05, all 5sp & 6sp non ETH, 12-1/4" to 13" clutch conversion, up to 550hp, 1100 ft-lbs torque, includes flywheel
|
| |
|
| MU 1947 Con O |
00-05, 6 sp ETC, up to 350hp, 750 ft-lbs torque
|
| MU 1947 Con OFE |
00-05, 6 sp ETC, up to 450hp, 1000 ft-lbs torque
|
| MU 1947 Con FE |
00-05, 6 sp ETC, up to 550hp, 1100 ft-lbs torque
|
| |
|
| MU 1947 Con O-G56 |
05-06, 6sp G56, up to 350hp, 750 ft-lbs torque
|
| MU 1947 Con OFE-G56 |
05-06, 6sp G56, up to 450hp, 1000 ft-lbs torque
|
| MU 1947 Con FE-G56 |
05-06, 6sp G56, up to 550hp, 1100 ft-lbs torque |
|
|
|
Con. O
Clutch features full organic linings. The pressure plate has been
modified for higher plate load and smoothness of engagement.
Con. OFE
Clutch
features a dual friction, organic and feramic lining. The pressure plate has been
modified for higher plate load and smoothness of engagement.
Con.
FE
Clutch features full feramic linings. The pressure plate has been modified
for higher plate load and smoothness of engagement.
MU
13-1.25 Conversions
South Bend has taken the 13" ETH clutch and modified
it to accept the 1 1/4 input shaft. This allows for a disk center that is 2-3
times larger and stronger than can be provided in the 12 1/4" clutch kits.
Kit comes complete with a flywheel, re-drilled and resurfaced to accept the larger
clutch.
|
|
|
MU0900 Con O |
MU1947 Con FE |
|
|
|
MU 13-1.25 Conversion
|
|
| |
| |
|
