BD Diesel 1064464 Heavy Duty Performance Transmission – 2WD

Code: BD1064464


In Stock


  • Pan adds 6qt extra oil capacity
  • Fully rollerized geartrain
  • Tighter clutch packs that provide a quicker shift
  • 30%-40% more clutch material with additional steels
  • Machined direct piston
  • Machined direct pressure place
  • Machined intermediate pressure plate
  • Machined overdrive piston
  • Machined overdrive pressure plate
  • Improved internal lubrication by adding high power boost valves
  • Heavy duty snap ring and blow-off valve to prevent runaway pressure damaging case
  • Reworked front pump
  • Added lube circuits
  • Heavy duty regulator valve to prevent crossleaks
  • Improved bearing designs
  • Upgrade supports
  • Upgraded sprags
  • Upgraded planetaries
  • Sure-loc snap rings
  • Replace plastic pressure plugs in valve body with aluminum
  • Solenoids hard wiring providing high temperature resistance
  • Clutch Count: COAST CLUTCH 3
  • Clutch Count: FORWARD 4
  • Clutch Count: DIRECT 6
  • Clutch Count: LOW REVERSE 6
  • Clutch Count: INTERMEDIATE 5
  • Clutch Count: OVERDRIVE 5
  • Increase the durability of your drivetrain
  • Revised oil circuits
  • Handles up to 300% more power and torque than the stock transmission
  • Extra clutches and stronger internals
  • BD rigid aluminum heavy duty transmission pan
  • Pan reduces case flex
  • Pan reduces internal oil leakage
  • Pan heat-dissipating fins keep temperature down
  • Pan magnetic drain plug
  • Not warranted for Race or Sled Pull use
  • Each transmission is dyno tested



  • 36-Months
  • 150,000 Miles
  • 12-Months
  • 24,000 miles
  • No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet.



Model Specific

This part fits select models

FordPowerstroke 6.02003
FordPowerstroke 6.02004
FordPowerstroke 6.02005
FordPowerstroke 6.02006
FordPowerstroke 6.02007